Schneider Servo Motor And Drive

motion servo drive - Lexium 26 - single and three phase 200...230 V - 750 W
This product is part of the Lexium Easy 26 range, an offer of motion servo drives for machines from 0.05kW to 4.5kW. The motion servo drive without EMC filter, features a HMI interface 7-segment display with 5 buttons. It is easy to mount and wire, thanks to identified plug-in connectors, easily accessed, all on the front panel of the drive. It is a motion servo drive with a rated supply voltage of 220V (single and three phase) for each phase, a frequency of 50/60Hz, a continuous output current of 4.5A at 16kHz, a power of 0.75kW/1.01HP and a continuous power of 750W at 220V. 

motion servo drive - Lexium 26 - single and three phase 200...230 V - 1 kW
This product is part of the Lexium Easy 26 range, an offer of motion servo drives for machines from 0.05kW to 4.5kW. The motion servo drive without EMC filter, features a HMI interface 7-segment display with 5 buttons. It is easy to mount and wire, thanks to identified plug-in connectors, easily accessed, all on the front panel of the drive. It is a motion servo drive with a rated supply voltage of 220V (single and three phase) for each phase, a frequency of 50/60Hz, a continuous output current of 7A at 16kHz, a power of 1kW/1.34HP and a continuous power of 1000W at 220V. 

Servo drives: high-precision positioning and machining processes with short control cycles. Innovation and efficiency - servo drives, tailor-made for every application. Integrated safety. Flexible motor selection. 

BCH2 servo motors are equipped with a 20-bit single-turn or multi-turnabsolute encoder.These absolute encoders perform the following functions:v measures the servo motor speed via the associated Easy Lexium 26 servo drive(this information is used by the servo drives position and speed controller)v sends data from the servo motor to the servo drive, which provides automaticidentification of the motor when the servo drive startsThis encoder measures the motor angular position with a precision of  2.6 arc minutes.The multi-turn absolute encoder also measures the number of motor turns.

This product is part of the Lexium 28 range, an offer of servo drives from 0.05kW to 4.5kW. The motion servo drive features EMC filter, integrated CANopen, CAN motion interface 7-segment display with 5 buttons. It is a motion servo drive with a rated supply voltage of 220V (single and three phase), an output current of 7A, nominal power of 1kW and continuous power of 1000W.

Ordering Information  Specifications General Specifications Characteristics  Servo Drives with Single-phase 100 VAC Input Power  Servo Drives with Single-phase or Three-phase 200 VAC Input Power  Servo Drives with Three-phase 400 VAC Input Power EtherCAT Communication Specifications Version Information  Names and Functions Servo Drive Part Names Functions  Dimensions

• High speed loop bandwidth: up to 1.2 kHz
• Supply voltage:
  • Single phase 220 V
  • Three phase 220 V
  • Three phase 380 V
• 0.1-7.5 kW
• Pulse/direction
• CANopen communications (IS620P-CO variant)
• Built-in keypad
• Fine tuning with PC software (InoServoShop)
• Inertia auto-tuning (on-line/off-line)
• Automatic gain tuning
• Adaptive notch filter
• Automatic/manual damping filter for low frequency resonance
• Complies with CE

Servo motors and drives are critical in machinery that needs intricate position control, such as conveyor belts, robotics, camera focus, and automation amongst others. Servo Motors can be broadly classified as simple electric motors which are controlled for specific angular rotation with the help of an added servomechanism.

 MR-JE, for Rated Motor Power up to 1000 W ; Dynamic Break, BUILT-IN ; Width (mm), 70 ; Height (mm), 168 ; Depth (mm), 185.

MS1H1-75B30CB-A331Z 750W NON BREAK SERVO MOTOR INNOVANCE. INPUT: 3PH AC 200-240V 3.7A 50/60Hz. 1PH AC 200-240V 7.9A 50/60Hz. OUTPUT: 3PH AC 0-240V 5.5A 0-400Hz 750W.

servo motor BCH, no oil seal, w key, 20-bit encoder, w/o brake-straight con   
Maximum mechanical speed, 5000 rpm. [Us] rated supply voltage, 220 V. network number of phases, Single phase. continuous stall current, 2.6 A.

750 Amperes MR-JE-70A Mitsubishi Servo Drive, 230VAC 1 Or 3 Phase.

Feature- Single, Contact1- NO, Color- Blue, Current (Ie)- 10 A (230V AC), Usage Category- AC15, Mechanical Life (Min Qty)- 50000, Electrical Life (Min Qty)-50000, Operating Frequency (On-Off/Hour)Mech. 900 Elec. 900,Insulation Voltage (Ui)-300V, Impulse Withstand Voltage (Uimp)- 2.5 kV, Dielectric Strength (Body-Contact)- 2.500V AC, Dielectric Strength (Contact-Contact)- 1.500V AC, Isolation Resistance10 M??? min.- (500V DC), Operating Temperature- 25 / +80 °C, Pollution Degree- 3, Protection Degree- IP20, Contact Material- AgNi, Cable Section1- 2.5 mm², Screw Torque- 1,5 Nm, Short Circuit Breaking Capacity (Ics)- 1 kA, Serial- PTM Series.

The Easy Lexium 26 range offers predefined combinations to suit therequirements of motion control applications and optimize the installationsperformance.v The combinations of servo motors with servo drives are based on the powerclass: both the servo motor and servo drive have the same power class (1).v The combination of each servo drive with its related servo motor is designed tocover a nominal power range from 0.05 kW/0.07 hp up to 7.5 kW/10.06 hp with200..240 V mains supply voltage (1).b The Easy Lexium 26 servo drives have degree of protection IP 20.b BCH2 motors provide a nominal torque from 0.16 Nm to 28.6 Nm and a nominalspeed from 1,000 to 3,000 rpm, depending on the model. They are suitable for awide variety of applications due to the different levels of motor inertia offered

HJ-KS73J Servo Drive Mitsubishi, 2.4nm - 7.2nm, 3 - Phase ; Output Power, 1.05 to 4.4 kW ; Input Phase, 3 - Phase ; Motor Type, Servo Drive

HJ-KS 102J Servo Motor Mitsubishi, 1 Phase- 3 Phase, 750W ; Input Phase. 1 Phase- 3 Phase ; Torque. 1.1nm