Finder Relay

Manufacturer FINDER Type of relay interface Contacts configuration SPDT Rated coil voltage 24V DC Max. operating current 6A AC contacts rating @R (at resistive load) 6A / 250V AC DC contacts rating @R (at resistive load) 6A / 30V DC Mounting DIN Leads screw terminals Relay variant Relay set Switched voltage max. 220V DC, max. 400V AC Relay series 38.51 Operating temperature -40...70°C Body dimensions 87.9x6.2x75.6mm IP rating IP20 Indication LED

Finder 34.51.7.060.0010 Relay socket + bracket, + LED, + EMC emission supressor Compatible with series.

A relay that has contacts that operate when the voltage drops below a set voltage. Undervoltage relays are used for protection against voltage drops, to detect short-circuit faults, etc.

TERMSERIES relay module, complete modules consisting of a relay and a base with AC/DC/UC coils, available in different versions:  With screw and tension-clamp connection  AgNi contact, optionally with hard gold-plated contacts  1 and 2 COs  Optionally with multiple-voltage input: 24...230 V UC  With various protective circuits in the input (free-wheel diode, RC element)  Illuminated ejection lever

093.16 Relay Accessory, Jumper, 39 Series,Space saving 6.2 mm wide Connections for 16-way jumper link  6 to 125 V AC/DC, 125 and 220 V DC,230 V AC and 24...240 V AC/DC supply SSR:24 - 125 V AC/DC, 6 to 220 V DC,230 V AC and 24...240 , AC/DCEMR and SSR: 12 to 24 V AC/DC supply  SLIM REALY JUMPER

• Item Code: 09361
• Delivery Time: EX STOCK
• Packaging Details: BOX

 Finder - 34.81.7.024.9024 - Solid State Relay, 34 Series, Ultra-Slim,PCB mount either directly or via PCB socket; 35mm rail mount via screw.

Coil operating range: In general, Finder relays will operate over the full specified temperature range, according to: • Class 1 – 80% to 110% of nominal coil 

These handy boards provide a simple method to interface a low level control output from a control system such as the FSR Flex Gpio ports to higher level loads such as a low voltage screen controller. They can also be used to reverse control output logic if necessary.