Schneider AC Drives

degree of protection - UL type 1 conforming to UL 508C..type of cooling - Forced convection.....supply frequency - 50...60 Hz +/- 5 %....network number of phases - 3 phases...[Us] rated supply voltage - 380...480 V - 15...10 %...motor power kW - 0.75 kW (normal duty) ,0.37 kW (heavy duty)...motor power hp :1 hp normal duty ,0.5 hp heavy duty.....

rated supply voltage - 380...500 V - 15...10 %nominal output current - 2.3 Amotor power kW - 0.75 kW for heavy dutyEMC filter - Class C2 EMC filter integratedIP degree of protection - IP20

Altivar Machine ATV320, a variable speed drive designed for Original Equipment Manufacturers (OEMs) that meets simple and advanced application requirements for 3 Phase synchronous and asynchronous motors from 0.18 to 15 kW (0.25 to 20 Hp).

Features and Benefits:

The Altivar Machine ATV320 matches a variety of machine throughput requirements with the following features:

• Open-loop motor control combined with simplicity for asynchronous and synchronous motors, even at low speed and dynamic accuracy for start/stop applications,

• Advanced connectivity with automation architectures such as CANopen, EtherNet/IP - Modbus TCP, EtherCAT, Profibus, Profinet, DeviceNet.

• Application specific functions and ATVLogic bring the application expertise and flexibility into the machines.

• Two form factors. book and compact

• Reliably accurate motor control

• Robust design with IEC 60721-3-3 class 3C3 coated printed circuit boards

• Comprehensive embedded safety

 

Model Numbers:

• ATV320U02M2C

• ATV320U04M2C

• ATV320U06M2C

• ATV320U07M2C

• ATV320U11M2C

• ATV320U15M2C

• ATV320U22M2C

Application

Simple and advanced machine requirements covered for

Packaging

Material Handling

Textile

Material working

Mechanical actuators

Hoisting

communication port protocol : Modbusline curren :10.2 A at 200 V , 8.5 A at 240 V.....speed range : 120...asynchronous motor control profile : Quadratic voltage/frequency ratio , Voltage/frequency ratio (V/f) , Sensorless flux vector control....connector type : 1 RJ45 (on front face) for Modbus...physical interface :2-wire RS 485 for Modbus....

power dissipation in W - 51.82 W at In , 588 W at Inspeed drive output frequency - 0.5400 Hztransient overtorque - 170200 % of nominal motor torque depending on drive rating and type of motorbraking torque - Up to 150 % of nominal motor torque with braking resistor at high inertia ,Up to 70 % of nominal motor torque without braking resistor

EMC filter - Without EMC filtertype of cooling - Integrated fansupply frequency - 50/60 Hz +/- 5 %communication port protocol- Modbusconnector type - RJ45 (on front face) for Modbusphysical interface - 2-wire RS 485 for Modbustransmission frame - RTU for Modbustransmission rate - 4800 bit/s

connector type - RJ45 (on front face) for Modbusphysical interface - 2-wire RS 485 for Modbustransmission frame - RTU for Modbustransmission rate - 4800 bit/s ,9600 bit/s ,19200 bit/s ,38400 bit/s

line current :5.9 A at 200 V ,4.9 A at 240 V....transient overtorque - 150170 % of nominal motor torque depending on drive rating and type of motor.....asynchronous motor control profile - Sensorless flux vector control , Voltage/frequency ratio (V/f) , Quadratic voltage/frequency ratio.....

Altivar Machine ATV320, a variable speed drive designed for Original Equipment Manufacturers (OEMs) that meets simple and advanced application requirements for 3 Phase synchronous and asynchronous motors from 0.18 to 15 kW (0.25 to 20 Hp).

Features and Benefits:

The Altivar Machine ATV320 matches a variety of machine throughput requirements with the following features:

• Open-loop motor control combined with simplicity for asynchronous and synchronous motors, even at low speed and dynamic accuracy for start/stop applications,

• Advanced connectivity with automation architectures such as CANopen, EtherNet/IP - Modbus TCP, EtherCAT, Profibus, Profinet, DeviceNet.

• Application specific functions and ATVLogic bring the application expertise and flexibility into the machines.

• Two form factors. book and compact

• Reliably accurate motor control

• Robust design with IEC 60721-3-3 class 3C3 coated printed circuit boards

• Comprehensive embedded safety

 

Model Numbers:

• ATV320U02M2C

• ATV320U04M2C

• ATV320U06M2C

• ATV320U07M2C

• ATV320U11M2C

• ATV320U15M2C

• ATV320U22M2C

Application

Simple and advanced machine requirements covered for

Packaging

Material Handling

Textile

Material working

Mechanical actuators

Hoisting

Altivar Machine ATV320, a variable speed drive designed for Original Equipment Manufacturers (OEMs) that meets simple and advanced application requirements for 3 Phase synchronous and asynchronous motors from 0.18 to 15 kW (0.25 to 20 Hp).

Features and Benefits:

The Altivar Machine ATV320 matches a variety of machine throughput requirements with the following features:

• Open-loop motor control combined with simplicity for asynchronous and synchronous motors, even at low speed and dynamic accuracy for start/stop applications,

• Advanced connectivity with automation architectures such as CANopen, EtherNet/IP - Modbus TCP, EtherCAT, Profibus, Profinet, DeviceNet.

• Application specific functions and ATVLogic bring the application expertise and flexibility into the machines.

• Two form factors. book and compact

• Reliably accurate motor control

• Robust design with IEC 60721-3-3 class 3C3 coated printed circuit boards

• Comprehensive embedded safety

 

Model Numbers:

• ATV320U02M2C

• ATV320U04M2C

• ATV320U06M2C

• ATV320U07M2C

• ATV320U11M2C

• ATV320U15M2C

• ATV320U22M2C

Application

Simple and advanced machine requirements covered for

Packaging

Material Handling

Textile

Material working

Mechanical actuators

Hoisting

product destination - Asynchronous motorsQuantity per set - Set of 1EMC filter - Without EMC filtertype of cooling - Integrated fansupply frequency - 50/60 Hz +/- 5 %communication port protocol -Modbusmotor slip compensation - Preset in factoryAdjustable  output voltage - 380..460 V three phaseelectrical connection - Terminal, clamping capacity: 1.5..2.5 mm (L1, L2, L3, PA/+, PB, U, V, W)tightening torque - 0.81 N.minsulation - Electrical between power and control

Altivar Machine ATV320, a variable speed drive designed for Original Equipment Manufacturers (OEMs) that meets simple and advanced application requirements for 3 Phase synchronous and asynchronous motors from 0.18 to 15 kW (0.25 to 20 Hp).

Features and Benefits:

The Altivar Machine ATV320 matches a variety of machine throughput requirements with the following features:

• Open-loop motor control combined with simplicity for asynchronous and synchronous motors, even at low speed and dynamic accuracy for start/stop applications,

• Advanced connectivity with automation architectures such as CANopen, EtherNet/IP - Modbus TCP, EtherCAT, Profibus, Profinet, DeviceNet.

• Application specific functions and ATVLogic bring the application expertise and flexibility into the machines.

• Two form factors. book and compact

• Reliably accurate motor control

• Robust design with IEC 60721-3-3 class 3C3 coated printed circuit boards

• Comprehensive embedded safety

 

Model Numbers:

• ATV320U02M2C

• ATV320U04M2C

• ATV320U06M2C

• ATV320U07M2C

• ATV320U11M2C

• ATV320U15M2C

• ATV320U22M2C

Application

Simple and advanced machine requirements covered for

Packaging

Material Handling

Textile

Material working

Mechanical actuators

Hoisting

communication port protocol :Modbus serial ,CANopen..rated supply voltage - 380..500 V - 15..10 %nominal output current - 2.3 Amotor power kW - 0.75 kW for heavy dutyEMC filter - Class C2 EMC filter integrated discrete input type :STO safe torque off, 24 V DC, impedance: 1.5 kOhm ,DI1DI6 logic inputs, 24 V DC (30 V) ,DI5 programmable as pulse input: 030 kHz, 24 V DC (30 V)

Altivar Machine ATV320, a variable speed drive designed for Original Equipment Manufacturers (OEMs) that meets simple and advanced application requirements for 3 Phase synchronous and asynchronous motors from 0.18 to 15 kW (0.25 to 20 Hp).

Features and Benefits:

The Altivar Machine ATV320 matches a variety of machine throughput requirements with the following features:

• Open-loop motor control combined with simplicity for asynchronous and synchronous motors, even at low speed and dynamic accuracy for start/stop applications,

• Advanced connectivity with automation architectures such as CANopen, EtherNet/IP - Modbus TCP, EtherCAT, Profibus, Profinet, DeviceNet.

• Application specific functions and ATVLogic bring the application expertise and flexibility into the machines.

• Two form factors. book and compact

• Reliably accurate motor control

• Robust design with IEC 60721-3-3 class 3C3 coated printed circuit boards

• Comprehensive embedded safety

 

Model Numbers:

• ATV320U02M2C

• ATV320U04M2C

• ATV320U06M2C

• ATV320U07M2C

• ATV320U11M2C

• ATV320U15M2C

• ATV320U22M2C

Application

Simple and advanced machine requirements covered for

Packaging

Material Handling

Textile

Material working

Mechanical actuators

Hoisting

product destination - Asynchronous motorsQuantity per set - Set of 1EMC filter - Without EMC filtertype of cooling - Integrated fansupply frequency - 50/60 Hz +/- 5 %communication port protocol - Modbusconnector type - RJ45 (on front face) for Modbusphysical interface - 2-wire RS 485 for Modbustransient overtorque 170200 % of nominal motor torque depending on drive rating and type of motorbraking torque - Up to 150 % of nominal motor torque with braking resistor at high inertiaUp to 70 % of nominal motor torque without braking resistor

range of product - Easy Altivar 310product or component type - Variable speed driveproduct specific application - Simple machineassembly style - With heat sinkdevice short name - ATV310network number of phases - Three phase

network number of phases :Single phase , Three phase.rated supply voltage :220 V (- 10..15 %) for three phase ,220 V (- 20..15 %) for single phase..output voltage : <= power supply voltage ,electrical isolation :Between power and control type of cable : Twisted shielded pairs cable (single or double) (temperature: 55 °C)..

Variable speed drive, Altivar Machine ATV320, 15 kW, 380...500 V, 3 phases, compact
Mouting mode - Wall Mount

Variable speed drive, Altivar Machine ATV320, 7.5 kW, 380...500 V, 3 phases, compact
Wall Mounting Mode,
Variant Standard Version,
Rated supply voltage- 380...500V - 15...10%.

This Easy Altivar 310 drive is a frequency inverter for three-phase asynchronous motors. Its protection index is IP20. It works at a rated power up to 2.2kW/3HP, and a rated voltage from 380V to 460V AC.variable speed drive ATV310, 2.2 kW, 3 hp, 380...460 V, 3 phase, without filter

This Easy Altivar 310 drive is a frequency inverter for three-phase asynchronous motors. Its protection index is IP20. It works at a rated power up to HD 18.5kW /25HP or ND 22kW/30HP, and a rated voltage from 380V to 460V AC. variable speed drive ATV310, 18.5 kW, 25 hp, 380...460 V, 3 phase, without filter

Altivar Machine ATV320 range is an offer of variable speed drives designed for Original Equipment Manufacturers (OEMs). Its compact form factor allows vertical stacking of drives inside machine frames It works at a rated power up to 11kW / 15hp and a rated voltage from 380V to 500V AC. Variable speed drive, Altivar Machine ATV320, 11 kW, 380...500 V, 3 phases, compact

This Easy Altivar 310 drive is a frequency inverter for three-phase asynchronous motors. Its protection index is IP20. It works at a rated power up to HD 22kW /30HP or ND 30kW/40HP, and a rated voltage from 380V to 460V AC.variable speed drive ATV310, 22 kW, 30 hp, 380...460 V, 3 phase, without filter

variable speed drive ATV12 - 0.18kW - 0.25hp - 200..240V - 1ph, 
Asynchronous motors,
Motor power kW 0.18 kW, 
Range of product    Altivar 12Product, 
component type- Variable speed drive.

This Altivar 320 variable speed drive can feed 3-phase synchronous and asynchronous motors. Its compact form factor allows vertical stacking of drives inside machine frames. It works at a rated power up to 2.2kW / 3hp and a rated voltage from 380V to 500V AC. Its robust design with IEC 60721-3-3 class 3C3 coated printed circuit boards allows to extend machine availability in harsh environmental conditions, for example at ambient temperatures of up to 60°C without the need of additional cooling. It incorporates functions suitable for the most common applications, including torque and speed accuracy at very low speed, high dynamic performance with flux vector control without sensor and extended frequency range for high-speed motors. It also incorporates parallel connection of motors and special drives using the voltage/frequency ratio and static speed accuracy and energy saving for open-loop synchronous motors. The drive software includes 5 safety functions that help machines meet safety requirements, whether or not they are used in conjunction with a Preventa safety module.

Altivar Machine ATV320, a variable speed drive designed for Original Equipment Manufacturers (OEMs) that meets simple and advanced application requirements for 3 Phase synchronous and asynchronous motors from 0.18 to 15 kW (0.25 to 20 Hp).

Features and Benefits:

The Altivar Machine ATV320 matches a variety of machine throughput requirements with the following features:

• Open-loop motor control combined with simplicity for asynchronous and synchronous motors, even at low speed and dynamic accuracy for start/stop applications,

• Advanced connectivity with automation architectures such as CANopen, EtherNet/IP - Modbus TCP, EtherCAT, Profibus, Profinet, DeviceNet.

• Application specific functions and ATVLogic bring the application expertise and flexibility into the machines.

• Two form factors. book and compact

• Reliably accurate motor control

• Robust design with IEC 60721-3-3 class 3C3 coated printed circuit boards

• Comprehensive embedded safety

 

Model Numbers:

• ATV320U02M2C

• ATV320U04M2C

• ATV320U06M2C

• ATV320U07M2C

• ATV320U11M2C

• ATV320U15M2C

• ATV320U22M2C

Application

Simple and advanced machine requirements covered for

Packaging

Material Handling

Textile

Material working

Mechanical actuators

Hoisting

range of product - Altivar Process ATV600product or component type - Variable speed driveproduct specific application - Process and utilitiesdevice short name - ATV630variant - Standard version

transient overtorque :15 170 % of nominal motor torque depending on drive rating and type of motor.switching frequency :2.16 kHz adjustable ,416 kHz with derating factor.motor slip compensation :Adjustable,Preset in factory

product destination :Asynchronous motors ,Synchronous motors.......EMC filter :Integrated with 50 m conforming to EN/IEC 61800-3 category C2 ,Integrated with 150 m conforming to EN/IEC 61800-3 category C3.............continuous output current :4 A at 4 kHz for normal duty ,2.2 A at 4 kHz for heavy duty....maximum transient current :4.4 A during 60 s (normal duty) ,3.3 A during 60 s (heavy duty)....switching frequency :2...12 kHz adjustable ,4...12 kHz with derating factor..........

product destination :Asynchronous motors , Synchronous motors......IP degree of protection : IP21 conforming to IEC 61800-5-1 ,IP21 conforming to IEC 60529..supply frequency :50...60 Hz - 5...5 % motor power kW :0.75 kW (normal duty) ,0.37 kW (heavy duty).........apparent power :1.1 kVA at 480 V (normal duty) , 0.7 kVA at 480 V (heavy duty)...synchronous motor control profile :Permanent magnet motor ,Synchronous reluctance motor.....

product destination :Asynchronous motors , Synchronous motors..IP degree of protection - IP21 conforming to IEC 61800-5-1 , IP21 conforming to IEC 60529 ...motor power kW :4 kW (normal duty) , 3 kW (heavy duty)....motor power hp - 5 hp normal duty ,4 hp heavy duty.........

Owing to our enriched industrial experiences, we are committed to providing a wide variety of excellent quality Altivar 32 AC Drive.

Product details:

connector type - RJ45 (on front face) for Modbusphysical interface - 2-wire RS 485 for Modbustransmission frame - RTU for Modbustransmission rate - 4800 bit/s ,9600 bit/s ,19200 bit/s ,38400 bit/s

Keeping in mind ever-evolving requirements of our respected clients, we are offering a premium quality range of AC Variable Speed Drives.

motion servo drive - Lexium 23 - single phase 200...255 V - 1 kW - I/O Schneider make SCHNEIDER LXM23DU10M3X. Servo Drive. Network frequency limits. Output current. Maximum leakage current. 

Motion servo drive - Lexium 23 - single phase 200...255 V - 400 W - I/O
Servo motors drive are critical in machinery that needs intricate position control, such as conveyor belts, robotics, camera focus, and automation amongst others. Servo Motors can be broadly classified as simple electric motors which are controlled for specific angular rotation with the help of an added servo mechanism. They are fundamentally a combination of various electronic parts, including the well-known DC and AC motors. They are operated in a closed loop mechanism which registers its position feedback to control its rotational speed.

A variable frequency drive controls the speed of an AC motor by varying the frequency supplied to the motor

supply frequency-  50...60 Hz +/- 5 %,  network number of phases- 3 phases, [Us] rated supply voltage 380...480 V 15...10 %, motor power kW,  2.2 kW (normal duty),  1.5 kW (heavy duty), motor power hp-3 hp normal duty 2 hp heavy duty, line current-  4.3 A at 380 V (normal duty) 3.8 A at 480 V (normal duty) 3.1 A at 380 V (heavy duty) 2.9 A at 480 V (heavy duty) prospective line Isc - 50 kA apparent power 3.2 kVA at 480 V (normal duty) 2.4 kVA at 480 V (heavy duty)continuous output current, 5.6 A at 4 kHz for normal duty4 A at 4 kHz for heavy duty, maximum transient current 6.7 A during 60 s (normal duty), 6 A during 60 s (heavy duty)asynchronous motor control profile, Constant torque standardOptimized torque mode,  Variable torque standard, 
synchronous motor control profile, Permanent magnet motorSynchronous reluctance motor, speed drive output frequency 0.1…599 Hz, nominal switching frequency 4 kHz switching frequency, 2...16 kHz adjustable, 4...16 kHz with derating factor, safety function STO (safe torque off) SIL 3 number of preset speeds, 16 preset speeds

Motion servo drive - Lexium 23 - single phase 200...255 V - 750 W - I/O
The servo drives cover a wide range of power ratings from 0.1kW to 7.5kW, with two different types of power; 200-255V Single Phase and 170-255V three phase.

discrete input type :STO safe torque off, 24 V DC, impedance: 1.5 kOhm , DI1.DI6 logic inputs, 24 V DC (30 V) ,DI5 programmable as pulse input: 030 kHz, 24 V DC (30 V).discrete output type :Open collector DQ+ 1 kHz 30 V DC 100 mA , Open collector DQ- 1 kHz 30 V DC 100 mA.minimum switching current :Relay output R1A, R1B, R1C, R2A, R2C: 5 mA at 24 V DCmotor slip compensation :Automatic whatever the load ,Adjustable 0.300 % ,Not available in voltage/frequency ratio (2 or 5 points)..switching frequency :2.16 kHz adjustable ,4.16 kHz with derating factor