Proximity Sensors

Photoelec sensor label fork 40x3 - 12..24 V DC - PNP/NPN NO/NC connect M8

inductive sensor XS2 M18 - L53mm - brass - Sn8mm - 12..24VDC - cable 2m  The XS range is an offer of inductive proximity sensors for the detection, without physical contact, of metal objects. The advantages of inductive detection are numerous, no physical contact with the object to be detected. Thus avoiding wear and enabling detection of fragile or freshly painted objects. High operating rates. Fast response. 

A cylindrical axial Omron Photoelectric Sensor is the Omron E3FA-DP12 2M sensing technique and has a 300 mm detection range for objects. The sensor has a pre-wired 2-meter cable for connection, and it uses a red LED light source. It uses a power supply voltage to operate, and its output is configured as PNP. It also supports the Dark-ON and Light-ON operating modes. Photo-optical workpieces are detected by photoelectric sensors. Diffuse-reflective, through-beam, retro-reflective, distance-settable, and sensors with integrated or separate amplifiers are just a few of the various types of sensors that OMRON offers.

• With these Photoelectric Sensors, the Amplifier and Sensor Head are separated to enable downsizing and facilitate adjustment.
• With these Photoelectric Sensors, the amplifier is built into the Sensor Head.
• These Photoelectric Sensors help achieve a total cost reduction because a wide AC or DC power supply range can be used.
• Area Sensors are Multi-beam Through-beam Sensors used to sense wide areas. The detection width of the Sensor can be selected according to the application.
• A wide range of adjusters to mount Photoelectric Sensors, Covers, Mounting Brackets, Slits, Reflectors, and Hand-held Checkers are available.

Get best price of Omron E3FA-DP12 2M Photoelectric Sensor at ₹1850/-.

Inductive proximity sensors XS, inductive sensor XS1 M18, L53mm, brass, Sn8mm, 12..24VDC, cable 2m,

The XS range is an offer of inductive proximity sensors for the detection, without physical contact, of metal objects. The advantages of inductive detection are numerous, no physical contact with the object to be detected.

Inductive proximity switch-IGYX 12P17B3/S14L, mounting type- flush,nominal sensing distance Sn-4 mm, assured sensing distance Sa-3,2 mm, temperature drift- ± 10 % of Sr (0 ... +60 °C) hysteresis 3...20% of Sr,output indicator-3 port LED red,switching frequency- < 1,5 kHz voltage supply range +Vs- 10...30 VDC, current consumption max. (no load)- 15 mA, voltage drop Vd- < 2,5 VDC, output current- < 200 mA, operating temperature -25 ... +75 °C, protection class- IP 67

Inductive proximity switch

• 2 mm
• 1,6 mm
• PNP make function (NO)
• connector M8
• -25 … 75 °C
• IP 67

Inductive Proximity Sensor, Cylindrical, E2B Series, M8, 4 mm, PNP-NO, 10 V to 30 V, Pre-wired

Inductive proximity sensors XS, inductive sensor XS6 M30, L62mm, brass, Sn15mm, 24...240VAC/DC, cable 2 m

Inductive proximity switch

• 4 mm
• 3,2 mm
• PNP make function (NO)
• connector M12
• -25 … 75 °C
• IP 67

Inductive proximity switch

• 4 mm
• 3,2 mm
• PNP break function (NC)
• connector M12
• -25 … 75 °C
• IP 67

Inductive proximity switch

• 4 mm
• 3,2 mm
• PNP make function (NO)
• cable, 2 m
• -25 … 75 °C
• IP 67

Capacitive proximity sensors (CPS) are sensing device designed to detect both metallic and nonmetallic targets. They can detect lightweight or small objects that cannot be detected by mechanical limit switches

We provide finest quality Capacitive Proximity Sensor with the most superior standards and performance available

Capacitive Proximity Sensors work by using the human body as one of the capacitive plates of an electrical circuit. A leader in low power capacitance touch sensors, NXP offers a range of auto calibrating sensors that compensate for changes in the environment, such as varying humidity or contamination on the electrode. Dirt, humidity, freezing temperatures or damage to the electrode do not affect the device's function. Find all makes & ratings of Capacitive Sensors. Inventory Liquidation discount available for non moving products, Subject to availability.

Features:-

• Detects capacitance changes on a remote sensing plate
• Proximity operation possible, no contact required
• Changes in the static capacitance are automatically compensated through continuous auto-calibration
• Operates when wearing gloves
• Sensing plate and the IC can be separated by a distance of several metres
• Useable with dirt on the touch area
• Adjustable sensitivity