Sensor

• Sensing type : Through-beam type
• Sensing distance : 10m
• Sensing target : Opaque material of min. Ø16mm
• Light source : Infrared LED(850nm)
• Response time : Max. 1ms
• Power supply : 12-24VDC  ±10%(ripple P-P: max. 10%)
• Operation mode : Light ON/Dark ON(set by switch)
• Control output : NPN, PNP open collector simultaneous output

• Sensing type : Diffuse reflective type
• Sensing distance : 300mm
• Sensing target : Opaque, Translucent material
• Light source : Infrared LED(940nm)
• Response time : Max. 20ms
• Power supply : 24-240VAC~ ±10% 50/60Hz, 24-240VDC  ±10%(ripple P-P: max. 10%)
• Operation mode : Light ON/Dark ON(set by switch)
• Control output : Relay

Sensor, Photo, Retroreflective, 5M Sensing distance, Light & Dark On, Relay Output, 24-240 VAC 

• Sensing type : Diffuse reflective type
• Sensing distance : 100mm
• Sensing target : Opaque, Translucent material
• Light source : Infrared LED(850nm)
• Response time : Max. 1ms
• Power supply : 12-24VDC  ±10%(ripple P-P: max. 10%)
• Operation mode : Light ON/Dark ON(set by switch)
• Control output : PNP open collector

Sensor, Photo, Diffuse, 1m Sensing distance, Connector Type, Light & Dark On, PNP Output, 12-24 VDC

• Sensing type : Through-beam type
• Sensing distance : 5m
• Sensing target : Opaque material of min. Ø10mm
• Light source : Infrared LED(940nm)
• Response time : Max. 1ms
• Power supply : 12-24VDC  ±10%(ripple P-P: max. 10%)
• Operation mode : Light ON/Dark ON(set by control wire)
• Control output : PNP open collector

• Power supply_DC power : 24VDC 
• Input type_RTD : JPt100Ω, DPt100Ω, DPt50Ω, Cu50Ω, Cu100Ω
• Input type_TC : K, J, E, T, R, B, S, N, C, L, U, PLII
• Input type_Analog : • Voltage: -50.0-50.0mV, -199.9-200.0mV, -1.000-1.000V, -1.00-10.00V
  • Current: 0.00-20.00mA, 4.00-20.00mA
• Sampling cycle : Analog input: 100ms, temperature sensor input: 250ms
• Approval : 
• Environment_Ambient temperature : -10 to 50   storage: -20 to 60
• Weight : Approx. 301g (approx. 160g)

A photoelectric sensor is a device used to determine the distance, absence, or presence of an object by using a light transmitter, often infrared, and a photoelectric receiver. They are largely used in industrial manufacturing

• Sensing type : Through-beam type
• Sensing distance : 15m
• Sensing target : Opaque material of min. Ø12mm
• Light source : Infrared LED(850nm)
• Response time : Max. 1ms
• Power supply : 12-24VDC  ±10%(ripple P-P: max. 10%)
• Operation mode : Light ON/Dark ON(set by switch)
• Control output : NPN open collector

BR100-DDT-P. Sensing type : Diffuse reflective type. Sensing distance : 100mm. Sensing target : Opaque, Translucent material. Light source : Infrared LED(940nm)

• Sensing type : Diffuse reflective type
• Sensing distance : 100mm
• Sensing target : Opaque, Translucent material
• Light source : Infrared LED(940nm)
• Response time : Max. 1ms
• Power supply : 12-24VDC  ±10%(ripple P-P: max. 10%)
• Operation mode : Light ON/Dark ON(set by control wire)
• Control output : PNP open collector

• Sensing type : Through-beam type
• Sensing distance : 4m
• Sensing target : Opaque material of min. Ø15mm
• Light source : Infrared LED(850nm)
• Response time : Max. 1ms

• Sensing type : Through-beam type
• Sensing Cannel : 1-channel
• Sensing distance : 30mm
• Sensing target : Opaquematerial of min. Ø1.5mm
• Light source : Infrared LED(940nm)
• Power supply : 12-24VDC  ±10%(ripple P-P: max. 10%)
• Operation mode : Light ON/Dark ON(set by control wire)
• Control output : PNP open collector

Sensor, Photo, Diffuse Reflective, Light On, 30mm Sensing Distance , NPN Control Output , 12-24 VDC

• Connector specification : M12
• Connection : Socket type
• Connector division : Female
• Number of connector pins : 4-pin
• Cable : DC 4-wire type

• Sensing type : Diffuse reflective type
• Sensing distance : 400mm
• Sensing target : Opaque, Translucent material
• Light source : Infrared LED(850nm)
• Response time : Max. 1ms
• Power supply : 12-24VDC  ±10%(ripple P-P: max. 10%)
• Operation mode : Light ON/Dark ON(set by control wire)
• Control output : PNP open collector

• Type : Built-in twin volume type
• Light source : Red LED(660nm)
• Response time : Max. 1ms
• Power supply : 12-24VDC  ±10%(ripple P-P: max. 10%)
• Operation mode : Light ON/Dark ON(set by control wire)
• Control output : PNP open collector

• Type : Standard type
• Light source : Red LED(660nm)
• Response time : Frequency 1: Max. 0.5ms
  Frequency 2: Max. 0.7ms
• Power supply : 12-24VDC  ±10%(ripple P-P: max. 10%)
• Operation mode : Light ON/Dark ON(set by ON/OFF button)
• Control output : PNP open collector

• Sensing type : Through-beam type
• Hysteresis(distance) : ≤0.05mm
• Response time : Light ON: Max. 20
  Dark ON: Max. 100
• Control output : NPN open collector
• Connection : Connector type

• Sensing type : Through-beam type
• Sensing distance : 1m
• Sensing target : Opaque material of min. Ø2mm
• Light source : Red LED(650nm)
• Response time : Max. 1ms
• Power supply : 12-24VDC  ±10%(ripple P-P: max. 10%)
• Operation mode : Light ON
• Control output : PNP open collector

Connector for BS5 Micro Photo Sensor

Photomicro Sensor, Light & Dark On, Connector Type, NPN Output, K-Type, 5-24 VDC 

Sensor, Photo, Diffuse Reflective, Light On, 30mm Sensing, NPN Output, 12-24 VDC

Safety light curtains protect personnel from injury and machines from damage by creating a sensing screen that guards machine access points and perimeters

• Type : Built-in twin volume type
• Light source : Red LED(660nm)
• Response time : Max. 1ms
• Power supply : 12-24VDC  ±10%(ripple P-P: max. 10%)
• Operation mode : Light ON/Dark ON(set by control wire)
• Control output : NPN open collector

Proximity sensors are standard, reliable, secure, and durable solutions for all kind of applications requiring non-contact detection

Safety Light curtains are electro sensitive devices using one or more light beams, emitted by an Emitter and received by a Receiver, to create an intangible controlled area

• Parameterization interface for the application-specific adjustment of the sensor setting via the service program ULTRA 3000
• Analog current and voltage output
• Synchronization options
• Adjustable acoustic power and sensitivity
• Temperature compensation

Inductive proximity sensors XS, inductive sensor XS1 M30, L60mm, brass, Sn10mm, 24...240VAC/DC, cable 2 m

MICRON M5-A multibeams photocells (A coding). Through-beam barrier type photocell with 5 beams foIdeal for use as a Muting sensor in palletizers that handle irregular loads and pallets. Used in MZSAFEGATE brakets for muting kits

The compact size of the photocells makes it possible to fit the protection system into very small spaces, while the possibility to use more photocells  provides the maximum flexibility in positioning the protective beams.

The photocells must be connected to control unit for esample: standard AU SX or AU SXM control unit with Muting or Mosaic to form a protection system that can be composed of 1, 2, 3 or 4 single beam photocells.

Isolated Converter, W50 X H80 mm, Multi input, Voltage 2(0-10VDC) output, 24VDC

Process temperature Refer to section "Operating conditions"Process pressure Refer to section "Operating conditions"
Connection variants Refer to section "Dimensional drawings"Mounting position Any, top, bottom, side, Humidity < 98 % RH , condensing, Style Compact transmitterOverall size Refer to section "Dimensional drawings"Material Stainless steel

The Contactless safety sensors are used to monitor the position of the safety devices sliding, hinged or removable.